ALL ABOUT LANOGUARD APPLICATION TOOLS AND SPRAYERS

Our range of sprayers and application tools are designed for their ease of use, and atomising application to give the best coverage of Lanoguard for the least product usage. We provide trigger sprayers and bottles for easy DIY use, injection tools for inner chassis, and also manual / air-line fed pressure sprayers for treating larger vehicles or surface areas.

Fundamentally, you can use any regular sprayers or compressors to apply Lanoguard – but read on to find out about our range, designed and tested alongside our users, for our users.

OUR SPRAY KIT, DESIGNED FOR IDEAL ATOMISATION

All our Lanoguard Underbody Care and Boat Kits come as standard with our Spray Kit, a combination of a professional sprayer and a 1.2m

flexible extension hose, so you can apply Lanoguard without carrying the bottle around with you. The trigger sprayer is designed with a .4 mm aperture, which we’ve found to be the best size nozzle for full atomisation and misting of our products. It gives you the best coverage for the least product. Importantly, these sprayers were also designed to be able to apply just as well at a 90-degree angle to ensure they are fit for underbody protection use.

‘GRAB AND GO’ PROFESSIONAL SPRAYER BOTTLES

Our 1L Professional Sprayer bottles are ideal for adding any leftover spray to and hanging up in the garage, we call these the ‘grab and go’ bottles ideal for top up treatments or just to have around for any lubrication or anti-corrosive needs you may have around the house or workshop.

The sprayers are DIY, easy and comfortable to use – and  can be used to apply our Moto Spray to the whole vehicle underbody and other components.

INJECTING LANOGUARD INTO INNER CHASSIS

Rust doesn’t just occur on the exposed, outer chassis – it can also be a very real problem on the inner chassis. This is why we have designed in-house our own 360 Injector Wand giving 360-degree misting for easy application of Lanoguard inside box sections, sills, and all inner chassis and harder to reach areas.

Our 360 Injector Wand comes as standard with our Regular Injector Kit, our Large Injector Kit and as part of our 360 Injector Pack and it screws on to the end of our Spray Kit and give you a 60mm reach inside these internals, for a more thorough treatment if desired. Keep in mind too that, due to these areas being completely out of UV exposure, Lanoguard spray will last even longer. 

PRESSURE SPRAYERS, COMPRESSORS, AND INDUSTRIAL / TRADE APPLICATION

As mentioned, Lanoguard can be easily applied with next to any regular sprayers, compressors or pressure sprayers. The only thing to note is that nozzle size and aperture is an important factor in atomising the product and thus reducing wastage. As such, with some sprayers you may find they will use slightly more product for the job than our trigger sprayer and pro sprayer bottle applicators.

To minimise this, we ourselves have worked with partners to develop pressure sprayers which provide quick and easy application to larger vehicles and surface areas, but still provide a good level of atomisation.

Our 2L Manual Pressure Sprayer is an affordable option, a pump-up pressure sprayer, it comes with injector accessories and nozzles and allows you to cover a large surface area with Lanoguard very easily. Meanwhile our 10L Stainless Steel Pressure Sprayer also comes with injection accessories, hoses and nozzle attachments. This is built to last and ideal for use by our industrial trade customers – in fact it forms a large part of our Trade Range of products and is used by our industrial partners including airports, marine, and heavy industry. This sprayer has a manual pump-up option but can also be plugged in to an airline and used in this way.  

Regardless of the sprayer you use, Lanoguard is very easy to apply for DIY or professional use. If you have your own sprayers and would like to know if it will work – the answer is most likely yes!

DESIGNED AND TESTED ALONGSIDE OUR USERS, FOR OUR USERS

Members of our Lanoguard Users Group have kindly helped us to test, improve and develop our range of application accessories and sprayers over time. We are constantly looking to improve our range and come out with new and improved versions which provide our users with even better coverage for even less product. Feedback, suggestions, and help in testing is very much appreciated – and we love co-creating products which, fundamentally, are developed with our users, for our users.

FIND OUT MORE OR BECOME A LANOGUARDER TODAY!

See our range of sprayers and accessories below, or feel free to get in touch and ask us any questions you may have on our Spray and Grease products, or any of our application tools and accessories. You can find us on info@lanoguard.co.uk or +44 (0) 330 100 1959. Thanks for reading!

We encourage and appreciate sharing our blog posts for informational and non-commercial purposes but please provide proper attribution by linking back to our website. Our content is copyrighted and should not be reproduced or copied without explicit permission, except where expressly permitted.