Skip to content

Protect Your Ford Fiesta from Rust: Comprehensive Guide to Common Rust Areas and How Lanoguard Can Help

Overview of Ford Fiesta Rust Issues

The Ford Fiesta is a popular and reliable vehicle, but like many cars, it can suffer from rust problems, especially as it ages. Rust not only affects the vehicle's appearance but can also lead to serious structural issues if left untreated. Below, we’ll dive into the common rust areas in the Ford Fiesta, including the rear coil spring body brackets, rear axle, brake pipes, and exhaust. We’ll also discuss how Lanoguard’s rust protection products can help extend the life of your Fiesta.

Common Rust Areas in the Ford Fiesta

  1. Rear Coil Spring Body Bracket

One of the most common rust issues in the Ford Fiesta is the rear coil spring body bracket. This component is crucial for the suspension system, and rust can weaken the bracket, leading to suspension problems. Over time, exposure to road salt, moisture, and debris can cause this part to corrode, which can be costly to repair if not addressed early.

  1. Rear Axle

The rear axle is another area prone to rust in the Ford Fiesta. A rusted rear axle can lead to reduced structural integrity and potentially unsafe driving conditions. If you notice rust starting to form, it’s important to treat it quickly to avoid more extensive damage and higher repair costs.

  1. Brake Pipes

Rusting brake pipes are a significant safety concern, as they can lead to brake fluid leaks and eventual brake failure. The Ford Fiesta, particularly the Edge model, has been reported to suffer from rusting brake pipes, which can be expensive to replace if the rust is extensive.

  1. Exhaust System

The exhaust system, especially the back box, is another part of the Ford Fiesta that commonly suffers from rust. A rusted exhaust can lead to poor engine performance and increased emissions, and it may require complete replacement if the corrosion is severe.

How Lanoguard Can Help Protect Your Ford Fiesta

Lanoguard provides an effective solution for preventing rust on your Ford Fiesta. Here’s how you can protect the key areas:

  • Underbody Protection: Lanoguard’s underbody sealant creates a protective barrier against moisture, road salt, and debris, preventing rust from forming on the rear axle, coil spring brackets, and brake pipes.
  • Exhaust Shield: Apply Lanoguard’s rust protection to your Fiesta’s exhaust system to protect it from corrosive elements. This can extend the life of the exhaust and prevent costly repairs.
  • Easy Application: Lanoguard products are easy to apply at home, saving you time and money on professional treatments.

How to Apply Lanoguard to Your Ford Fiesta

  1. Preparation: Clean the areas you intend to protect, ensuring they are free from dirt and loose rust. A thorough wash and dry are recommended.
  2. Application: Shake the Lanoguard product well, then apply it using a brush or spray bottle, focusing on the rear coil spring brackets, rear axle, brake pipes, and exhaust.
  3. Curing: Allow the product to dry and cure for the recommended time before driving the vehicle.

FAQs

Q: How much does it cost to repair a rusted rear axle on a Ford Fiesta?
A: The cost of repairing a rusted rear axle can vary depending on the severity of the rust and your location. On average, you might expect to pay between £300 to £600 for repairs, including labour.

Q: Is rust on the brake pipes covered under warranty?
A: Rust on brake pipes may be covered under your Ford warranty if the vehicle is still within the warranty period. However, rust damage due to normal wear and tear is often excluded, so it’s best to check with your local Ford dealer.

Q: Can I apply Lanoguard products myself?
A: Yes, Lanoguard products are designed for easy DIY application. You can protect your Ford Fiesta from rust at home without the need for specialist tools or equipment.

Q: How often should I reapply Lanoguard to my Fiesta?
A: It’s recommended to reapply Lanoguard once a year or after a particularly harsh winter to ensure continuous protection.

 

By addressing these common rust areas and using Lanoguard’s high-quality protection products, you can keep your Ford Fiesta in excellent condition for years to come. Don’t let rust ruin your ride—take proactive steps today!

Frequently Asked Questions

Find answers to common questions and learn more about Lanoguard's products, applications, and benefits.

Moto Range is designed for all vehicles, bikes, trailers and machinery to name a few. It protects the whole vehicle underbody and chassis from rust, corrosion and electrolysis with a strong barrier coat. Find out more and see our Moto Range.

Marine Range is designed for boats and any machinery submerged in sea water. It protects from rust, corrosion and electrolysis the same as our Moto Range, but also contains marine growth inhibitors to stop barnacle build up on any equipment submerged in seawater. It is safe, non-toxic and marine ecology friendly. Some of its uses include on outboard and inboard motors including electrics, propellers and prop shafts and boat trailers. Find out more.

Outdoor Range is a thinner formula, designed for metal, rubber, vinyl, wood, and almost all materials. It can be used on BBQs, sheds, fences and decking to name a few. It provides protection from corrosion, rust and waterproofs as wells preventing mould build-up in woods and vinyls due to it containing anti-fungal. Find out more.

Lanoguard has been designed for yearly/seasonal applications. It should be topped up at least once a year to ensure continuous protection. Although due to the simple application process there’s no harm in doing an Autumn & Spring application! The product is broken down by UV, so the more it is exposed to sunlight the shorter its life span. Inside box sections or inner chassis for example, it will last longer.

The general rule of thumb is that a little Lanoguard goes a long way, 1.8L of moto spray per application. – is ample coverage for vehicles such as Land Rovers and Pick Up trucks any vehicles over this size we would recommend more than 2L. Click here to look at our range.

Preparation is very minimal - all you need to do is jet wash your vehicle removing any dirt and grime. Make sure you remove any flaking or loose bits of rust, paint or underseal. Sometimes a wire brush can be used if needed to remove flaking bits. Ensure the vehicle is dry before you apply Lanoguard – it doesn’t have to be bone dry, as Lanoguard will displace moisture to an extent, but ensure you do not apply to a dripping wet surface. See our how to apply page here.

Lanoguard is great for chassis with surface rust. It has a natural affinity to ferrous metals and will bond to the metal underneath any surface rust, it acts as a barrier by hermetically sealing to the surface keeping oxygen and water out - stopping any rust from developing further.

Yes, you most certainly can. Lanoguard works fine with almost all sprayers, compressors, and applicators. You may find that it uses slightly more product than our trigger sprayer applicators will, but you’ll still get a nice even coverage of Lanoguard which will protect well. We do have a range of sprayers and applicators available on our accessories page.

Lanoguard reaches its final state around 7 to 10 days after application. Day 0 it is “oily” day 3 “soft” and final state is dry to the touch, but you know something is there. Like a candle to feel. Maybe a little softer. It dries to a clear / transparent semi satin wet look and stays that way for some months eventually dulling a little. But always stays clear; and of course, you can jet wash it to clean it back to how it was when you put it on. It is best to not drive the vehicle for 24hours to let it get through the first part of the curing process.

Lanoguard is eco-friendly and has green non-hazardous certifications. It does not require special handling, protective clothing or disposable gloves, which all add to the carbon footprint of utilising a product that is hazardous. The primary ingredient of Lanoguard is Lanolin which is a very ecologically safe and sound base. In fact, an entire dam in New Zealand was moved down river on a base of Lanoguard marine grease which shows you how the river authority was not concerned about any toxins that would be left as a result.